Published on 15/07/2020
Enduro , MotionPro , Motocross Technology , MOTOCROSS MX , MOTORCROSS , Rocky Mountain ATV/MC , Video , YOUTUBE
Technique: this is how you clean the fuel injector of a dirt bike
The injector of your dirt bike sprays a fuel mist directly into the combustion chamber. Just like a carburetor, an injector can also become dirty, disrupting the spray pattern. There will therefore be a loss of power because combustion is not optimal.
The small fuel channels inside the injector can become dirty or clogged. That is why an injector needs to be cleaned occasionally. A special device from Motion Pro is commercially available for this purpose. You also need an aerosol injector cleaner or contact cleaner. You use the device to spray the cleaner in two directions through the injector. During the second cleaning, you spray the cleaner in the normal spray direction and you can check the spray pattern for irregularities.
Also to read
Team HRC Honda to Portugal with Tim Gajser as the only rider
The 2024 MXGP World Championship kicks off the first of three straight races this weekend in Agueda, Portugal for the fifth round in this exciting battle. The next weekend it will…VIDEO: Roger De Coster about communication with the riders
In a video interview with Roger De Coster, the difficult start of the KTM boys in the US is discussed. It's about the set-up of the engines and how everyone...An update on Tyla van de Poel's injury
Tyla van de Poel crashed during the EMX125 in Arco di Trento and broke his tibia and fibula. Another pilot hit his front wheel on a ski jump, causing him to...Jago Geerts: “I want to come back to Lommel”
Jago Geerts is working hard to bounce back from an injury he sustained in early March during the opening race of the 2024 MXGP World Championship in Argentina. The Belgian, who at…
Your reactions